Table of Contents
Advertisement
DIAL AND BUTTONS
INTRODUCTION
The options/functions are not available
with all washing programmes. Check
the compatibility between options/
functions and washing programmes in
the "Programme Chart". An option/
function can exclude another one, in
this case the appliance doesn't allow
you to set incompatible options/
functions.
ON/OFF
Press this button for a few seconds to activate or
deactivate the appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically deactivates
the appliance after several minutes to reduce the
energy consumption, you may need to activate the
appliance again.
For more details, refer to Stand-by paragraph in
Daily Use chapter.
18
Door locked indicator.
Delay start indicator.
The digital indicator can show:
•
Reset position (
•
Programme duration (e. g.
•
Delay time (e. g.
•
Cycle end (
).
•
Warning code (e.g.
•
Error indicator (
•
Indication of total operating hours of the appliance. Refer to the 'Oper-
ating hours counter' section in the 'Settings' paragraph for more details.
Flextime indicator.
Anti-stain indicator.
Extra Rinse indicator.
Add garments indicator. it lights at the beginning of the washing phase,
when it is still possible to pause the appliance and add more laundry.
Child safety lock indicator.
Machine clean indicator. This is a recommendation to perform the drum
cleaning.
).
).
).
).
).
PROGRAMME DIAL
For selecting the desired washing programme.
Refer to 'Programmes' chapter for more details.
The position
is a "Reset" function, which stops
and resets the running programme. The display
shows empty dashes to indicate that no
programme was selected.
TEMP.
When you select a washing programme, the
appliance automatically proposes a default
temperature.
The indicator Cold = cold water.
The indicator of the set temperature comes on.
SPIN
When you set a programme, the appliance
automatically sets the default spin speed allowed
for each programme.
Advertisement
Table of Contents
