Connections - Panasonic KX-TG6312 Operating Instructions Manual

Preparation

Connections

Connect the AC adaptor cord (A) by
pressing the plug firmly (B). Connect
the telephone line cord until it clicks into
the base unit and telephone line jack
(C).
Base unit
L Use only the supplied Panasonic AC
adaptor PQLV207.
L Use only the supplied telephone line
cord. Using another telephone line
cord may not allow the unit to work
properly.
To single-line
telephone jack
(RJ11C)
(120 V AC,
60 Hz)
Charger
Available for:
KX-TG6312/KX-TG6313/
KX-TG6322/KX-TG6323/KX-TG6324
L Use only the supplied Panasonic AC
adaptor PQLV209.
A
12
For assistance, please visit http://www.panasonic.com/help
C
A
B
Hook
B
Hooks
(120 V AC, 60 Hz)
Note:
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a
Panasonic T-adaptor (page 6).
Emergency power can be supplied to the
unit by connecting a Panasonic battery
back-up power supply noted on page 6.
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function
properly.
DSL/ADSL filter
To single-line
telephone
jack (RJ11C)