Table of Contents
Advertisement
ADJUSTMENT [LCD Color Television] ASIA_EU
Setting Data of Signal Unit
After replacing Main board, the following initialization is required.
CAUTION: Whenever using new Main board to the set, setting the PANEL
data according to Panel option data.
Note:
In case initialization by setting wrong PANEL is done, there is a possibility of abnormal
display.
1) Check the picture carefully. If necessary, adjust any adjustment item above.
Perform "Auto tune" on the owner's manual.
PANEL (HEX) Model name
0x01 or 0x04
32AV501P
0x02 or 0x05
37AV501P
0x03 or 0x06
42AV501P
Initializing Data setting flowchart after replacing the Signal Unit
Panel vendor
IPS(old) or IPS(new)
IPS(old) or IPS(new)
LGD(old) or LGD(new)
Page 7 of 16
Advertisement
Table of Contents
