Radio Operation - Clarion VX402E Owner's Manual

Radio Operation

Listening to the Radio
Touch the Tuner button on the Main menu display.
The tuner mode screen is displayed.
Touch the [Band] key or touch the [Band] button
on remote control to select the radio band. Each
time the button is pressed, the radio reception
band changes in the following order: FM1, FM2,
FM3, AM, FM1...
Seek Tuning
1. Touch the [Band] key to select the radio band
(FM or AM).
2. T ouch the [ ] or [
seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.
Manual Tuning
1. Touch the [BAND] key to select the radio band
(FM or AM).
2. T ouch the [ ] or [
seek a station.
• When touching the [
sought in the direction of higher frequencies.
• When touching the [
sought in the direction of lower frequencies.
Recalling a preset station
There are 2 ways to recall the preset station.
Using the remote control:
1. Touch the [Band] button to select the desire
band (FM or AM) on the remote control.
2. T ouch the preset number (1 to 6) on numeric
pad.
Using the tuner unit:
1. Touch the [Band] key to select the desire band
(FM or AM) on the tuner.
] key to automati cally
] key, the station is
] key, the station is
] key to auto matically
] key, the station is
] key, the station is
2. T ouch the [ ] key to display the Preset List
screen.
3. Touch the preset station (1 to 6) on tuner
display.
4. T ouch [ ] or [ ] to select next station up or
down the preset list.
5. Touch the [AS/PS] button to begin scanning
the preset stations.
Manual memory
1. T ouch the desired Band key to select the band
you wish to store in.
2. T une in the station you wish to store using seek
tuning, manual tuning, or preset tuning.
3. T ouch and hold the desired Preset key you
wish to store the current station for more than
2 seconds.
4. T ouch [ ] or [ ] to select next station up or
down the preset list.
Auto Store
The Auto Store is a function for storing up
to 6 stations that are automatically tuned in
sequentially. If 6 receivable stations cannot be
received, a previously stored station remains at
the memory position.
1. Touch the [Band] key to select the desired
band. (FM or AM)
2. Touch and hold the [AS/PS] key to start the
Auto Store function. A beep sounds and
the stations with good reception are stored
automatically to the preset channels.
Preset Scan
The Preset Scan receives the stations stored
in the preset memory in order. This function is
useful when searching for the desired station in
memory.
1. Touch the [Band] key to select the desired
band. (FM or AM).
2. Touch the [ ] key to display the Preset List
screen.
3. Touch the [AS/PS] key to start the Preset
Scan. The unit starts scanning each station for
10 seconds sequentially. Presets with a weak
signal will be skipped.
4. When the desired station is tuned in, touch
the [PS] key again to continue receiving that
station.
33
VX402E/VZ402E