To dial after confirming the entered number
1
Dial a phone number.
•If you misdial, press (CLEAR). One digit is
erased. Dial the correct phone number.
2
Press
.
OR
To have a hands-free phone conversation,
press
, and when the other party
answers, talk into the microphone.
•After a few seconds, the display will show the
length of the call and the battery strength.
To hang up, press
3
handset on the base unit.
To redial using the redial list (Memory Redial)
The last 5 phone numbers dialed with the handset are stored in the redial
list.
1. Press
(REDIAL/PAUSE)
•The last number dialed is displayed.
2. Scroll to the desired number by pressing
or
.
Ñ
•You can also scroll through the list by pressing
(REDIAL/PAUSE).
•To exit the list, press
3. Press
or
•To erase an item, repeat steps 1 and 2, and press (CLEAR).
•If "No items stored" is displayed, the list is empty.
To put a call on hold
Press
(HOLD).
•"Hold" is displayed.
•The IN USE/CHARGE/HOLD indicator on the base
unit flashes.
•If you put a call on hold for more than 6 minutes, an alarm tone will sound. The
call will be disconnected after a total of 10 minutes.
To release the hold
Lift the handset, or press
•If another phone is connected on the same line (p. 52), you can also release the
hold by lifting its handset.
For assistance, please call: 1-800-211-PANA(7262)
or place the
(OFF)
.
.
(OFF)
.
or
.
3334444
Ex.
Talk
3334444
Talk
00-00-00
333-4444
Ö
GF
Redial list
Hold
00-00-08
was pressed.
23