Table of Contents
Advertisement
Setting
Advanced Media Setting
Restore Default
Universal Print Settings
Setting
Paper Source
Options
Description
Platen Gap
Select a larger value if print results are
smudged by print head strikes
Top/Bottom Margins
The Standard margins are as follows for the
top and bottom:
• CAD/line drawings: 3 mm
• Other: 30 mm
Select a different value as necessary.
Note: Left and right margins are always 3
mm.
Back Tension
Select High or Extra High if paper wrinkles
during printing
Drying Time
Drying Time per Pass: Select from 0 to 10
seconds for the amount of time the print head
pauses to allow drying after each pass
Drying Time per Page: Select from 0 to 60
minutes for the amount of time the printer
pauses to allow drying after each page is
printed
Auto Cut
Select On to automatically cut roll paper after
each page is printed, or select Off to cut paper
manually
—
Restores the custom setting to the defaults
Options
Description
Roll Paper
Select the paper source from which you want
to print
Auto Sheet Feeder
Cut Sheet (1 sheet)
123
Advertisement
Table of Contents
