Table of Contents
Advertisement
Drive specification
Vibration, operating
Operation Rotational vibration
Vibration, non-operating
Drive acoustics, sound power (bels)
Idle**
Performance seek
Non-recoverable read errors
Annualized Failure Rate (AFR)
Rated Workload
Warranty
Load-unload cycles
Supports Hotplug operation per
Serial ATA Revision 3.2 specification
*
One GB equals one billion bytes when referring to hard drive capacity.
Accessible capacity may vary depending on operating environment and formatting.
** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification,
which may increase acoustic and power to operational levels.
†
Seagate does not recommend operating at sustained case temperatures above 60°C.
Operating at higher temperatures will reduce useful life of the product.
Seagate IronWolf Serial ATA Product Manual, Rev. B
ST10000VN0004
Average annualized workload rating: <180TB/year
The AFR specification for the product assumes the I/O workload does not exceed the average
annualized workload rate limit of 180 TB/year. Workloads exceeding the annualized rate may
degrade the product AFR and impact reliability as experienced by the particular application. The
average annualized workload rate limit is in units of TB per calendar year.
To determine the warranty for a specific drive, use a web browser to access the following web
page: http://www.seagate.com/support/warranty-and-replacements/.
From this page, click on the "Is my Drive under Warranty" link. The following are required to be
provided: the drive serial number, model number (or part number) and country of purchase.The
system will display the warranty information for the drive.
ST8000VN0004
5–22 Hz:
0.25 Gs, Limited displacement
22–350 Hz: 0.50 Gs
350–500 Hz: 0.25 Gs
20–1500Hz: 12.5 rads/s²
2–500 Hz: 2.27 Grms ref
2.8 (typical)
3.0
(max)
3.2 (typical)
3.4
(max)
15
1 sector per 10
bits read
0.88% based on 8760 POH
600,000
Yes
7
Advertisement
Table of Contents
