Table of Contents
Advertisement
34
PROGRAMMING MODE - SETUP MODE
10. how to change add super wash type
Entering set up
mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display previous add super wash type.
Press Warm or Cold button and then select the add
super wash type you want.
Wash time increase extra 3
minutes.
Both (Wash time increase extra 3
minutes and rinsing once more.)
Rinsing once more.
Press the Start button.
The machine sets up the add super wash type, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the Hot button twice.
Button
Display
appears
appears
Advertisement
Table of Contents
