Table of Contents
Advertisement
38
PROGRAMMING MODE - SETUP MODE
14. how to change add super wash type
Super wash can be used to add extra wash time, rinse cycle, or both.
enter setup mode.
You will see lqc1
NOTE
• Add Super Wash(Auto dosing) is only applied for Payment type
• Custom program is used for OPL type
Press the hot button.
Press the Warm or the cold button until
in the display.
Press the Start button.
Press the Warm or the cold button until
in the display.
Press the Start button.
Display previous add super wash type.
Press Warm or cold button and then select the add
super wash type you want.
Wash time increase.
Both (Wash time increase and
rinsing once more.)
Rinsing once more.
Press the Start button.
The machine sets up the add super wash type, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• All types - Push the Hot button twice.
Button
Display
appears
appears
Advertisement
Table of Contents
