Download Print this page

Viking VK572 Technical Data Manual page 4

Ec/qrec ordinary hazard pendent sprinkler

Advertisement

Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com
Visit the Viking website for the latest edition of this technical data page www.vikinggroupinc.com
Sprinkler Base
Part Number
1
13722 Pendent
Maximum
Sprinkler Spacing
L x W
5
16 ft. x 16 ft. (4.9 m x 4.9 m)
18 ft. x 18 ft. (5.5 m x 5.5 m)
20 ft. x 20 ft. (6.1 m x 6.1 m)
12 ft. x 12 ft. (3.7 m x 3.7 m)
14 ft. x 14 ft. (4.3 m x 4.3 m)
Approved Temperature Ratings
A - 155 °F (68 °C), 175 °F (79 °C), 200 °F
(93 °C), and 286 °F (141 °C)
B - 155 °F (68 °C), 175 °F (79 °C), and
200 °F (93 °C)
Part number shown is the base part number. For complete part number, refer to current Viking price list schedule.
1
Metric K-factor measurement shown is when pressure is measured in Bar. When pressure is measured in kPa, divide the metric K-factor shown by 10.0.
2
This chart shows listings and approvals available at time of printing. Other approvals may be in process. Check with the manufacturer for any ad-
3
ditional approvals.
cULus Listed for use in the U.S. and Canada.
4
To determine "Minimum Water Supply Requirement" for areas of coverage where length and width of actual sprinkler spacing are not equal, select
5
the "Maximum Sprinkler Spacing" from the chart that is equal to or greater than the larger of the actual spacing (length or width) dimensions used.
Example: When using 10 ft 6 in x 13 ft (3.2 m x 4 m) sprinkler spacing, provide the "Minimum Water Supply Requirement" listed in the chart for 14 ft x
14 ft (4.3 m x 4.3 m) spacing. For areas of coverage smaller than shown, use the "Minimum Water Supply Requirement" in the appropriate hazard
group for the next larger area listed. The distance from sprinklers to walls shall not exceed one-half the "Maximum Sprinkler Spacing" listed for the
"Minimum Water Supply Requirement" used.
For Sprinkler VK572 with High Temperature 286 °F rating, UL restricts the QR listing to their use in Ordinary Hazard occupancies to the high temperature
6
zones within a building only. VK572 quick response sprinklers with this temperature rating cannot be used throughout the property.
Accepted for use, City of New York Department of Buildings, MEA Number 89-92-E, Vol. 38.
7
Prior to 2007, sprinkler VK572 was classified as Standard Response for all room sizes.
8
cULus Listed as corrosion resistant.
9
Form No. F_072313
19.02.21
The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058
Approval Chart 1 (UL)
Standard/Quick Response Extended Coverage
Ordinary Hazard Pendent Sprinkler VK572 (K14.0)
NPT Thread Size
SIN
Inches
VK572
3/4
Maximum
Ordinary Hazard Group I
Area per
Sprinkler
Flow / Pressure
256 ft
(23.8 m
)
39 gpm @ 7.8 psi (147.6 l/min @ 0.54 bar)
2
2
324 ft
(30.1 m
)
49 gpm @ 12.3 psi (185.5 l/min @ 0.85 bar)
2
2
400 ft
(37.2 m
)
60 gpm @ 18.4 psi (227.1 l/min @ 1.27 bar)
2
2
144 ft
(13.4 m
)
39 gpm @ 7.8 psi (147.6 l/min @ 0.54 bar)
2
2
196 ft
(18.2 m
)
39 gpm @ 7.8 psi (147.6 l/min @ 0.54 bar)
2
2
Approved Finishes
1 - Brass, Chrome, White Polyester, Black
6
Polyester, and ENT
Rev 19.1
TECHNICAL DATA
Nominal K-Factor
mm
U.S.
20
14.0
Minimum Water Supply Requirements (cULus only)
Standard Response
Quick Response
6, 8
9
Footnotes
EC/QREC ORDINARY
HAZARD PENDENT
SPRINKLER VK572 (K14.0)
Maximum Water
Working Pressure
metric
2
202
175 psi (12 bar)
Ordinary Hazard Group II
Flow / Pressure
51 gpm @ 13.3 psi (193.1 l/min @ 0.92 bar)
65 gpm @ 21.6 psi (246.1 l/min @ 1.49 bar)
80 gpm @ 32.7 psi (302.8 l/min @ 2.25 bar)
39 gpm @ 7.8 psi (147.6 l/min @ 0.54 bar)
39 gpm @ 7.8 psi (147.6 l/min @ 0.54 bar)
Approved Escutcheons
X - Standard surface-mounted escutcheons
Y - Standard surface-mounted escutcheons or recessed
with the Micromatic
®
Escutcheon
Page 4 of 6
Overall Length
Inches
mm
2-7/16
62
cULus/NYC
Listings
3,4,7
(See Design
Criteria)
Pendent
VK572
A1X, B1Y
A1X, B1Y
A1X, B1Y
A1X, B1Y
A1X, B1Y
Model E-1 or E-2 Recessed

Advertisement

loading

This manual is also suitable for:

K14.0