Scanning To A Network Folder; Scanning To A Cloud Connector Profile - Lexmark 18M0410 User Manual

Scan
c
From the Shortcut Type menu, select FTP, and then configure the settings.
d
Apply the changes.
2
Load an original document into the ADF tray or on the scanner glass.
3
From the control panel, navigate to:
Shortcuts > FTP
For non-touch-screen printer models, press
4
Select the shortcut.
5
Scan the document.

Scanning to a network folder

1
Create a network folder shortcut.
a
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
b
Click Shortcuts > Add Shortcut.
c
From the Shortcut Type menu, select Network Folder, and then configure the settings.
d
Apply the changes.
2
Load an original document into the ADF tray or on the scanner glass.
3
From the home screen, navigate to:
Shortcuts > Network Folder
For non-touch-screen printer models, press
4
Select the shortcut.
Scanning to a Cloud Connector profile
This feature is available only in some printer models.
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Cloud Connector.
3
Select a cloud service provider, and then select a profile.
Note: For more information on creating a Cloud Connector profile, see
profile" on page 49.
4
Touch Scan, and then assign a filename and destination folder.
to navigate through the settings.
to navigate through the settings.
"Creating a Cloud Connector
72