Table of Contents
Advertisement
Outdoor Drainage
1. Insert the rubber head into the outlet. Then screw the sealing cap into the heat pump drain outlet.
2. There is a 1/4" hole on the window panel for leading the drainage hose outside during the heating
mode.
3. Make sure to insert the drain hose at least 8 inches (20 cm).
4. Attach duct tape so that the drain hose can fix the window panel. (Duct tape is not provided.)
NOTE
• Inserting the drain hose in the unit will automatically activate the drain function.
Garden Hose Installation for Dehumidifying (Dry Mode Only)
1. Remove the drain plug when using the Dry (dehumidifying) mode.
2. Install a 0.54" (13.5 mm) inside diameter garden hose (not provided) into the continuous drain port
and place the open end of the hose over a floor drain or bucket.
NOTE
• Install the garden hose when you need dehumidification in high humidity.
• This product has a self-evaporative system. The condensing water will be recycled to cool the condenser.
This not only improves cooling efficiency, but also saves energy for you.
1
2
More than 8"
INSTALLATION
17
Advertisement
Table of Contents
