Table of Contents
Advertisement
Other functions
Setting the time and date
You can adjust the date and time from [Date & Time] in the [System Settings] menu
(page 28).
Restoring this product to the default settings
You can restore settings or recorded content to the default settings from [Restore
Settings] in the [System Settings] menu (page 29).
Firmware update
When the latest software is released on our website, you can update the software of this
unit (page 6).
CAUTION
• The USB storage device for updating must contain only the correct update file.
• Never turn this product off or disconnect the USB storage device while the firmware is being updated.
• You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
1
Download the firmware update files into your computer.
2
Connect a blank (formatted) USB storage device to your computer then locate the
correct update file and copy it onto the USB storage device.
3
Connect the USB storage device to this product (page 18).
4
Follow the on-screen instructions to finish updating the firmware.
NOTES
• This product will reset automatically after the firmware update is completed if the update is
successful.
• If an error message appears on the screen, perform the above steps again.
• If the update fails and the product does not start, insert the USB storage device containing the update
file into the unit, turn the ignition switch off (ACC OFF) then on (ACC ON) again, and retry the update
to see if the update is executed.
- 31 -
Advertisement
Table of Contents
