Weblink - Pioneer DMH-WT3800NEX Operation Manual

WebLink™

You can operate WebLink compatible applications with finger gestures such as tapping,
dragging, scrolling, or flicking on the screen of this product.
NOTES
• The supported finger gestures may vary depending on the WebLink compatible application.
• To use WebLink, you must first install the WebLink Host app on the iPhone or smartphone. For details
about the WebLink Host app, visit the following site: https://www.abaltatech.com/weblink/
• Be sure to read Using app-based connected content (page 117) before you perform this operation.
• Copyright protected files such as DRM cannot be played.
WARNING
Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you
must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it
while the car is parked. No feature should be used unless it is safe to do so under the driving conditions
you are experiencing.
Using WebLink
Important
• Pioneer is not responsible for content or functions accessed via WebLink, which are the responsibility
of the application and content providers.
• Availability of non-Pioneer content and services, including apps and connectivity, may change or
discontinue without notice.
• When using WebLink with the Pioneer product, available content and functions will be limited while
driving.
Starting procedure
For iPhone users
WebLink Supported iPhone Operating Systems
iOS 14 or higher
1
Unlock your iPhone and connect it to this product via USB.
2
Touch then swipe left on the screen.
3
Touch [WebLink].
NOTE
For USB connection, refer to the Quick start guide.
- 54 -