Table of Contents
Advertisement
18
www.aeg.com
Temp.
11
touch but‐
ton
On/Off
12
push but‐
ton
Permanent Extra
Rinse
Child Lock
Acoustic signals
When you select a washing programme, the appliance automatically
proposes a default temperature.
Touch this button repeatedly until the desired temperature value ap‐
pears on the display.
When the display shows the indicators
does not heat the water.
Pressing this button for a few seconds allows to activate or deactivate
the appliance. Two different tunes sound while switching the appli‐
ance on or off. As the Stand-by function automatically deactivates the
appliance to decrease the energy consumption in a few cases, you
may need to activate the appliance again.
Refer to "Stand-by option" paragraph in "Daily Use"
chapter for more details.
With this option you can permanently have an extra rinse.
To activate/deactivate this option touch the Option button, the rele‐
vant indicator
comes on/goes off over rinse phase symbol.
This option adds two rinses.
With this option you can prevent that the children play with the control
panel.
To activate/deactivate this option, touch the Intensive/Prewash but‐
ton until the indicator
You can activate this option:
•
After you touch the Start/Pause button: all the buttons and the pro‐
gramme dial are deactivated (except On/Off button).
•
Before you touch the Start/Pause button: the appliance cannot
start.
The appliance keeps the selection of this option after you switch it off.
This appliance is provided with different acoustic signals, that operate
when:
•
You activate the appliance (special short tune).
•
You deactivate the appliance (special short tune).
•
You touch the buttons (click sound).
•
You make a wrong selection (3 short sounds).
•
The programme is completed (sequence of sounds for about 2 mi‐
nutes).
•
The appliance has a malfunction (sequence of short sounds for
about 5 minutes).
To deactivate/activate the acoustic signals when the programme is
completed, touch the Intensive/Prewash and the Delay Start buttons
simultaneously for about 6 seconds.
If you deactivate the acoustic signals, they continue
operate when the appliance has a malfunction.
and
comes on/goes off on the display.
, the appliance
Advertisement
Table of Contents
