Viessmann FB2A Installation And Service Instructions For Contractors page 23

Steps - commissioning, inspection and...
Commissioning steps
Inspection steps
Maintenance steps
•
23. Checking the neutralising system (if installed)
•
24. Checking the anode connection................................... 40
•
25. Testing the anode earth current with an anode tester 40
•
26. Draining the boiler on the DHW side............................ 42
•
27. Cleaning the primary cylinder....................................... 43
•
28. Checking and replacing the magnesium anode (if
•
29. Returning the primary cylinder into use....................... 45
• •
30. Checking the diaphragm expansion vessel and
• • •
31. Checking the function of safety valves
• • •
32. Checking electrical connections for tightness
• • •
33. Checking gas equipment for tightness at operating
• •
34. Checking the combustion quality................................. 47
• • •
35. Checking the external LPG safety valve (if installed)
•
36. Matching the control unit to the heating system......... 48
•
37. Adjusting the heating curves........................................ 54
•
38. Connecting the control unit to the LON....................... 56
•
39. Scanning and resetting the "Service" display............. 58
• • •
40. Fitting the front panels................................................... 59
•
41. Instructing the system user........................................... 60
Commissioning, inspection, maintenance
required).......................................................................... 44
system pressure............................................................. 46
pressure........................................................................... 46
(cont.)
Page
23