Table of Contents
Advertisement
¡ Do not mix different liquid deter-
gents
¡ Do not mix detergent and fabric
softener
¡ Do not use products that have ex-
pired or are highly congealed
¡ Do not use products containing
solvents, caustic agents or volatile
substances (e.g. bleach)
¡ Use dyes sparingly as salt may
damage stainless steel
¡ Do not use color-bleaching agents
in the appliance
¡ Do not pour vinegar into the dis-
pensers → Page 34 of the intelli-
gent dosing system
operation
13 Basic operation
operation
13.1 Switching on the appli-
ance
Requirement: The appliance has
been correctly installed and connec-
ted.
→ "Installation and connection",
Page 12
Press
.
▶
The switch-on process takes a few
seconds.
a An audible function test is carried
out.
Note: The lighting for the drum goes
out automatically.
13.2 Setting a programme
Turn the programme selector and
1.
set the required programme.
→ "Programmes", Page 26
If required, adjust the programme
2.
settings.
→ "Adjusting the programme set-
tings", Page 31
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 31
Adjust the programme settings.
▶
→ "Buttons", Page 23
Observe the information about op-
erating logic → Page 18.
Notes
¡ The programme settings are not
saved permanently for the pro-
gramme.
¡ The setting is saved if you activate
or deactivate the intelligent dosing
system.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡ A programme is set.
→ "Setting a programme",
Page 31
¡ The programme settings have
been adjusted.
→ "Adjusting the programme set-
tings", Page 31
Press and hold
▶
seconds.
Press
to call up the saved pro-
gramme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 26
operation en
for approx. 3
31
Advertisement
Table of Contents
