STRAINER PRODUCT MANUAL Thank you very much for choosing the Yoshitake’s product. To ensure the correct and safe use of the product, please read this manual before use. This manual shall be kept with care for future references. The symbols used in this manual have the following meanings.
3. Operation Parts Name Body Screen Gasket Dust, scale, and other foreign substances which flow into the inlet side of the strainer are removed by the screen [3]. 4. Nominal Size Selection To make the best use of the strainer and satisfy the operating requirements to the maximum, take notice of the following.
5. Maintenance 5.1 Precaution for installation Caution 1. When installing, check the direction of the product so that the fluid flowing and the arrow marked on the product are in the same direction. * Setting the product in wrong directions prevents the product from performing as intended. 2.
6. Disassembly, Cleaning and Reassembly Excessive amount of foreign substances inside the product reduces filtration area and hampers fluid flow. If the product is kept for such condition, the screen is damaged and results in adverse effect on the piping system due to excessive pressure difference. 6.1 Precaution for disassembly and inspection Warning 1.
( e.g. in case of corrosion due to outdoor use). Fire, flood, earthquake, thunder and other natural disasters. Consumable parts such as O-ring, gasket, diaphragm and etc. Yoshitake is not liable for any damage or loss caused by malfunction or defect of the product. PDD-046f...