Panasonic Lumix DMC-LX1 Operating Instructions Manual page 31

n Program AE
The camera automatically sets the shutter
speed and the aperture value according to
the brightness of the subject.
1
1 Remove the lens cap.
2 Turn the camera on.
3 Set the mode dial to program
AE mode [L].
4 Slide the focus switch to [AF].
3
Recording pictures (basic)
2
4
2
Aim the AF area 1 to the point
you want to focus and then press
the shutter button halfway.
1 2
P
F2.8 1/25
3 4
• : Press the shutter button halfway to
A
focus.
• The focus indication
the aperture value
speed are displayed.
4
• You can change the shutter speed and
aperture value with program shift (P34).
3
Take a picture.
• : Press the shutter button fully to
B
take the picture.
When the
subject is not
focused
Focus Blink (green)
indication
AF area Turns from
white to red
Sound Beeps 4 times Beeps 2 times
A
is lit and then
2
and the shutter
3
When the
subject is
focused
On (green)
Turns from
white to green
31
VQT0S19