Panasonic Lumix DMC-LS85 Operating Instructions Manual page 24

Preparation
v [FORMAT]
• Use batteries with suffi cient power or the AC adaptor (optional: P103) when formatting.
Do not turn the camera off during formatting.
• If a card has been inserted, only the card is formatted. To format the built-in memory,
remove the card.
• If the card has been formatted on a PC or other equipment, format it on the camera
again.
• It may take longer to format the built-in memory than the card.
• If the built-in memory or the card cannot be formatted, consult your nearest Service
Center.
For USA and Puerto Rico assistance,
please call: 1-800-211-PANA (7262) or,
contact us via the web at:
http://www.panasonic.com/contactinfo
9 [LANGUAGE]
• When you set to other language by mistake, select [9] from the menu icons to set the
desired language.
. [DEMO MODE]
A Jitter detection demonstration
B Movement detection demonstration
• In Playback Mode, [JITTER, SUBJ. MOVE DEMO.] cannot be
displayed.
• Press [DISPLAY] to close [JITTER, SUBJ.MOVE DEMO.].
• Press any button, such as [MENU/SET], to close [AUTO
DEMO].
• [JITTER, SUBJ. MOVE DEMO.] is an approximation.
• [AUTO DEMO] has no TV output capability.
24
VQT1X05
Initializes the built-in memory or card. Formatting
irretrievably deletes all the data so check the data
carefully before formatting.
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to:
lumixconcierge@ca.panasonic.com
Set the language displayed on the screen.
[ENGLISH]/[DEUTSCH] /[FRANÇAIS] /
[ITALIANO] /[ESPAÑOL]/[
Available in Canada only
Allows you to show [JITTER, SUBJ. MOVE DEMO.] or
the camera's features.
[JITTER, SUBJ. MOVE DEMO.]
[AUTO DEMO]: The camera's features are displayed as
a slide show.
[OFF]/[ON]
] /[ ]
A
B