Resetting The File Number - Panasonic Lumix DMC-LC5PP Operating Instructions Manual

Resetting the File Number

REC
MONITOR
AUTO REVIEW
BEEP
POWER SAVE
NO. RESET
CLOCK SET
SELECT:
NUMBER RESET
RESET FILE NO.
IN THE CAMERA?
SELECT:
82
SETUP
2 MIN.
SET EXIT
NO
YES
SET:
As the file numbers are recorded
sequentially by the camera side, when you
use some cards, it could happen that the
file numbers on your cards are not in order.
Use this function when you insert a new
card and you want to start recording from
the file number 0001, or when you want to
set the file numbers of the recorded cards
in consecutive numbers.
[Preparation]
Set the operational mode dial to REC
mode (single mode [
[ ]).
1
Press the [MENU] button.
2
Press 1 to open the setup menu.
3
Press 3/4 to select [NO. RESET]
and then press 1.
4
When this message is displayed
"RESET FILE NO. IN THE
CAMERA?", press 3/4 to select
[YES].
5
Press the [REVIEW/SET] button to
set.
6
Press the [MENU] button.
• The menu will disappear.
] or burst mode