Setting The White Balance - Panasonic Lumix DMC-LC33 Operating Instructions Manual

Setting the White Balance

1,4 2,3
2,3
REC1/3
W.BALANCE
PICT.SIZE
QUALITY
SPOT MODE
SELECT SET
• The setting of the white balance is applied to the other recording modes.
• In simple mode [
[AUTO].
• When taking a picture with the flash, the white balance will be automatically
adjusted (for AUTO and Halogen mode), but the white balance may not be
properly adjusted when the flash light is insufficient.
Recording images (advanced)
Auto White Balance is designed to
automatically adjust the camera to produce
natural flesh tones. In most situations it works
fine. In some situations where several
different types of lighting are present,
enhanced performance can be achieved by
setting the white balance manually.
[Preparation]
• Set the mode dial except for
[
1
2
SETUP
3
• AUTO: if the auto white balance is set
1600
•
•
EXIT
MENU
•
•
4
• The menu will disappear.
] or motion image mode [
48
]/[ ]/[ ]. (P22)
Press the [MENU] button.
Press 3/4 to select [W.BALANCE].
Press 2/1 to select the mode.
(Daylight):
for recording outdoors on a bright day
(Cloudy):
for recording under a cloudy and shady
sky
(Halogen):
for recording under halogen lighting
(White set):
for manual setting (Read the following
page where the manual setting is
explained in detail)
Press the [MENU] button.
], the white balance is fixed to