Panasonic Lumix DMC-FH27 Operating Instructions Manual page 128

The picture cannot be printed when the camera is connected to a printer.
•
Pictures cannot be printed using a printer which does not support PictBridge.
> Select [PictBridge(PTP)] when connecting.
The ends of the pictures are cut at printing.
> When using a printer with a Cropping or borderless printing function, cancel this function
before printing. (For details, refer to the operating instructions for the printer.)
> When you order photo studios to print pictures, ask the photo studio if the 16:9 pictures can
be printed.
An unreadable language was selected by mistake.
> Touch the [Setup] menu icon [
A red lamp sometimes turns on when the shutter button is pressed halfway.
•
In dark places, the AF Assist Lamp
The AF Assist Lamp does not turn on.
•
Is [AF Assist Lamp] on the [Rec] Mode menu set to [ON]?
•
The AF Assist Lamp does not turn on in bright places.
The camera becomes warm.
•
The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
The lens clicks.
•
When the brightness changes due to zoom or camera movement etc., the lens may click and
the picture on the screen may drastically change. However, the picture is not affected. The
sound is caused by the automatic adjustment of the aperture. This is not a malfunction.
The clock is reset.
•
If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please re-set the clock.
When pictures are taken using the zoom, they are slightly distorted and the
areas around the subject contain colours which are not actually present.
•
It is possible that the subject may be warped slightly, or the borders get coloured, depending on
the zoom magnification, due to the characteristics of the lens, but this is not a malfunction.
Others
(P105)
Others
] and then select [~] to set the desired language.
(P82) lights red to make it easier to focus on a subject.
- 128 -
(P82)
(P18)
(P40)