Table of Contents
Advertisement
10.1.7. Registering a Handset to the Base Unit
The supplied handset and base unit arepre-registered. If for some reason the
handset is not registered to the baseunit, re-register the handset.
1 Handset:
2 Base unit:
3 Handset:
Note:
L
While registering, "Base in registering" is displayed on allregistered
handsets.
L
When you purchase an additionalhandset, refer to the additionalhandset's
installation manual forregistration.
10.1.8. Deregistering a Handset
A handset can cancel its ownregistration to the base unit, or otherhandsets
registered to the same baseunit. This allows the handset to end itswireless
connection with the system.
1
2
3
4 {OFF}
{MENU} i # 1 3 0
Press and hold MLOCATORN forabout 5 seconds until theregistration tone
sounds.
If all registered handsets startringing, press {LOCATOR} againto stop, then
L
repeat this step.
L
The next step must be completedwithin 90 seconds.
Press {OK}, then wait until a longbeep sounds.
{MENU} i # 1 3 1
L
All handsets registered to thebase unit are displayed.
{ }
: Select the handset you want tocancel. i {SELECT}
{ }
: "Yes" i {SELECT}
45
KX-TG155SK/KX-TGA660M
Advertisement
Table of Contents
