Image/Data File (F) - Omega Engineering OSXL-101 User Manual

1. Image/Data File (F)

_Start Saving(R)_
Selecting [Start Saving] will start saving temperature value
data files (.csv) and thermal image files (.jpg) into
designated folder.
_Stop Saving (P)_
Selecting [Stop Saving] will stop saving.
_Image/Data Setup (S)_
By selecting [Image/Data Setup], Saving Setup window will
appear.
[Sensor Selection]
Check ( ) the checkbox for the sensor(s) that you need to
save data from..
[Saving Interval]
You can specify the interval of saving files here in
hour/minute/second format. The minimum interval is 1
second.
[Saving Mode Setup]
<Continuous>
This sets the duration of data saving to infinite. Once you
select [Start Saving], selecting [Stop Saving] from
Image/Data File(F) menu is the only way to stop saving.
<Duration>
This sets the period of time in hour/minute/second format
that image and data files will be saved after you select
[Start Saving]. You can start saving by selecting [Start
Saving] from Image/Data File(F) menu. This function will
stop saving at the end of the set duration time.
<Saving Schedule>
You can schedule time and date by clicking the down
arrow on time setting window here to start and stop saving
files. In order to start saving, however, you need to select
[Start Saving] from the Image/Data File(F) menu.
[Data Format]
Check ( ) the checkbox for the data you want to save. You can specify a directory and folder that
you want to save these files into by clicking [Brows] button at Directory section. The default
location is [OSXL-101] folder under My Documents. These settings are activated only by clicking [OK].
button at the bottom. To cancel these settings, click [Cancel] button.
Date
Sensor No.
Y-coordinate
Example of CSV file display
OSXL-101 Application Software
OSXL-101 Application Software
X-coordinate
Temperature
value of each
pixel
21
Example of JPEG file display