Self Demo Mode - Panasonic Palmcorder MultiCam PV-L453 Operating Instructions Manual

Self Demo mode is on when the screen
below appears. To turn it off, follow
steps 1-4 below.
EVF or LCD Monitor
2 3 4
, ,

Self Demo Mode

Before you begin...
• Connect Camcorder to power source.
1
Set POWER to CAMERA.
2
Press MENU for
MENU mode.
Press UP or
DOWN to select
SELF DEMO
3
Press M.FOCUS to select OFF.
1
4
Press MENU to exit.
Note:
• Self Demo stops automatically if battery
is attached (page 9) and cassette tape is
inserted (page 11).
• Inserting a tape alone (or attaching a
partially charged battery) only temporarily
stops Self Demo.
• Self Demo stops for 30 seconds when the
Back Light is pressed.
To turn Self Demo back on:
• Set to SELF DEMO : ON in MENU screen.
.
7