Table of Contents
Advertisement
Self Demo Mode
If no operation takes place for approx.
10 minutes after the AC Adaptor was
connected to the Palmcorder and the
POWER Switch was turned to CAMERA
without inserting a Cassette, the
Palmcorder is automatically set to Self
Demo mode for introducing its function.
To turn it off, follow steps 1~4 below.
[ EVF or LCD Monitor ]
3, 4
JOG KEY
2
MENU
1
POWER
DV103-K.p 9-11.p65
Before you begin
• Connect the Palmcorder to a power
source. (pp. 14, 15)
1
Set POWER to CAMERA.
2
Press MENU to display the CAMERA
FUNCTIONS menu screen.
3
Rotate JOG KEY to select
FUNCTIONS
display the OTHER FUNCTIONS menu
screen.
4
Rotate JOG KEY to select
MODE
OFF.
• Press MENU to exit.
Note
• If any button is pressed or operated
(except PLAY/MULTI and ZOOM), the
Self Demo mode is cancelled.
• The Self Demo mode can be started by
setting DEMO MODE to ON and by
exiting the menu.
To turn Self Demo back on:
• Set to DEMO MODE : ON in MENU
screen.
11
Before Using
OTHER
, and press JOG KEY to
DEMO
, and press JOG KEY to select
11
2003/06/11, 13:18
Advertisement
Table of Contents
