Before Using (Using The Shoulder And Hand Straps, Lens Cap); How To Remove The Sensor Tag; Attaching Shoulder Strap; Hand Strap - Panasonic Palmcorder MultiCam PV-L453 Operating Instructions Manual

Before Using

How to remove the Sensor tag

Attaching Shoulder Strap

Remove Battery Pack before completing
the following steps:
1
Undo strap ends
from buckles.
2
Thread strap ends through Strap
Rings on Camcorder.
3
Re-insert the strap
ends into buckles.
Lens Cap
Attaching the Lens Cap Cord to the Hand Strap:
Remove the Hand Strap from the front clasp and thread
the Strap through the loop in the Lens Cap Cord.
Reattach the Hand Strap.
12
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com

Hand Strap

Sensor tag
2
3
1
min. 25.4 mm (1 inch)
Attaching the Lens Cap Strap:
Thread the Strap through the
Lens Cap attachment ring as
illustrated at left.
1
Open the Hand Strap as illustrated
at left.
2
Remove the Sensor tag.
Then, replace the Hand Strap.
Adjust the Length of the
Shoulder Strap
Pull a loop of strap from buckle, then pull
strap tight to shorten or lengthen.
Hand Strap
Adjust Hand Strap length to fit your hand as
shown.