Before You Begin - Panasonic Palmcorder PV-DV103 Operating Instructions Manual

Before Using
Using EfficiBright™ LED Light
To brighten the natural colors in a scene.
GAIN UP works together with the LED Light
to enhance the light's brightness.
Note
• Use LED Light for recording subjects
1.5 m (4.9 feet) away or closer.
Press LIGHT
Press LIGHT
Press
LIGHT
1, 2, 3
8
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
1
LED Light ON
GAIN UP ON
2
LED Light ON
GAIN UP OFF
3
LED Light OFF
GAIN UP OFF
Built-in LED
Light
LIGHT

Before you begin

• Connect the Palmcorder to a power
source. (pp. 14, 15)
• Set POWER to CAMERA.
1
Press LIGHT. (Mode
• LED Light and GAIN UP turn ON.
• GAIN UP ON will be brighter than
when only LED Light is ON, however,
ghost images will appear.
2
Press LIGHT. (Mode
• GAIN UP turns OFF.
• To eliminate ghost images, use this
mode.
3
Press LIGHT. (Mode
• LED Light turns OFF.
• Pressing LIGHT again returns to
Note
• Using Light reduces battery time.
• Set LIGHT to OFF when not in use.
• Do not look directly into the light.
• If the LED Light is used with a Conversion
Lens attached, a slight vignetting
(darkening around edges) effect occurs
on the screen.
• Using MagicPix at the same time will
make conditions even brighter. (p. 39)
1
)
2
)
3
)
1
.