Panasonic HDC-SD40 Owner's Manual page 105

Problem
Scenes cannot be
deleted.
Problem
Video or audio is not
output even though it is
connected to TV
correctly.
The images are
squeezed horizontally.
If the SD card is inserted
in another device, it is
not recognized.
When connected by the
USB cable, this unit is
not detected by the other
devices.
VIERA Link does not
work.
Playback
≥ Release the protect setting. (l 73)
≥ Any scenes/still pictures where the thumbnails are
displayed as
pictures are unnecessary, format the media to erase the
data. (l 44) Please be aware that if a media is formatted
then all the data recorded on the media is erased and
cannot be recovered. Back up important data on a PC,
disc etc.
With other products
≥ Please read the operating instructions of your TV and
select the channel that matches the input used for the
connection.
≥ Change the [TV ASPECT] setting to match the aspect
ratio of the TV. (l 76)
≥ Change the setting of the unit depending on the cable
connecting to the TV. (l 77)
≥ TV screen is not displayed during recording or when
PRE-REC is set. Check on the screen of the unit. Also,
audio is not output from the TV during recording mode.
≥ Check that the device is compatible with the capacity or
type of SD card (SD Memory Card/SDHC Memory Card/
SDXC Memory Card) that you inserted. Refer to the
operating instructions of the device for details.
≥ When connected to other devices using only the battery,
reconnect using the AC adaptor.
(Setting on this unit)
≥ Connect with a HDMI mini cable (optional). (l 78)
≥ Set [VIERA Link] to [ON]. (l 78)
≥ Turn the unit off and then back on again.
(Setting on other devices)
≥ If the TV input does not switch automatically, switch the
input using the TV remote control.
≥ Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the
connected device.
Check points
cannot be deleted. If the scenes/still
Check points
105
VQT3J95