Selecting Conduits For A Modem Hotsync Operation - Palm PalmModem Handbook

Note: See "Network preferences and TCP/IP software" in your
handheld handbook for information on creating a network
connection.
8. Tap Service and select a service.
Tap here
9. Tap Done.
Note: Before performing a network HotSync operation, you must
enable the network HotSync technology and perform a local
HotSync operation. Contact your System Administrator to set
up the network HotSync technology, and for additional
information, go to this web site:
Selecting conduits for a modem HotSync
operation
The Conduit Setup dialog box on your handheld enables you to define
which files and/or applications synchronize during a modem
HotSync operation. You can use these settings to minimize the time
required to synchronize data with a modem.
Chapter 2
Tap here
http://www.palm.com
.
Page 11