System Setting - Titan MG Series Manual

Hook and lock function
The hook is not only for ease to hang up, it
is also a lock lever allow you to fix control
stick at certain position .
Turn the hook downwards , increased friction to
curb movement of control stick . turn it upwards
to release control stick .
Charging
If you find the low level of power, please plug the charger in
12V DC jack at side of monitor to charge, status indicator
turns red and flashes, the red will change to green when the
battery is fully charged.
Ready for use
Please insert the Micro SD card into the card slot on,
press power button for 3 seconds, the device enters
preview mode, real time image appears in screen, for the
fist time use, please set the time and date, language ,etc
.
The monitor could not be turned off normally when it is not being combined with
NOTE
the probe unit.

System Setting

Switch on device and enter preview mode, press menu to access menu interface, use
to select system setting.
Light frequency
Power Save
Text Set
Date & Time
Language
OK
Enter
MENU
04
50Hz
OFF
Back