Quick Setup - Titan MG Series Manual

Probe unit
⑯Connector
⑱Hook
⑲Working Channel
⑳Insertion Tube

Quick Setup

Connecting monitor and probe unit
Put the connecting parts close facing , align the lock
button and the hole on the probe side , press lock
button ,plug in with a clack ,release the lock button ,
the two parts will be combined securely .
To separate the monitor and probe , press the lock
button , pull down the probe unit and which will be
taken apart .
After connecting the monitor, please check the monitor
rotatable along with horizontal and vertical axis respectively.
⑰Control Stick
㉑Image Brightness
03
BRT
㉒Snap
Alignment