Storage And Maintenance - Titan MG Series Manual

Press OK to back-forward,repeatedly press OK to get 2x,4x,6x
speed. Press
Press
PB Press
Protect&Delete
In the image viewing mode , select a picture or video file , press MENU to enter the item
of Protect and Delete .
Protect is to prevent the files from
being deleted carelessly . You can
choose protect :
Single The current one
Protect All All the files
Unprotect All Remove protect from all files
Delete
Single Delete the current one
All Delete all files
Storage & Maintenance
1. Cleaning components
Cleaning insertion tube
Wipe thoroughly with a piece of gauze or other material moistened with neutral detergent,
next clean by gauze moistened with clear water , and then wipe the insertion tube dry off
all moisture.
Clear the insertion tube immediately after withdrawing the insertion tube. Leave the
NOTE
very dirty insertion tube for long periods can cause it to be corroded.
Cleaning distal end
Grasping the rigid portion of camera end, use a clean soft piece of gauze or cotton swabs to
wipe off dirty and water. Best results may be obtained using commercially available absolute
ethanol. Fig08
to pause or continue to play .
to fast -forward , repeatly press to get 2x, 4x,6x,8x speed.
to go back previous interface .
09
Single
Protect All
Unprotect All
Enter
OK MENU
Single
All
Enter
OK MENU
Back
Back