Working With Memos - 3Com PalmPilot Professional Handbook

Note: When working with the Memo Pad, you can immediately
change to any other application (Address Book, etc.) of your
PalmPilot by using the front panel buttons. Any work you have
done with the Memo Pad will be saved, and will reappear when
you return.

Working with Memos

A memo is the screen of your PalmPilot where you enter, review,
and modify the individual entries of the Memo Pad. A memo can
contain up to four-thousand characters; the number of memos you
can store is dependent only on the memory available in your
PalmPilot.
To create a new memo:
1. With the Memo Pad application running on your PalmPilot,
tap the New button, as shown in the following diagram:
Note: In the Memo List screen, you can also begin writing in
the Graffiti
letter will begin your new memo, and will automatically be
capitalized.
2. The new memo appears on screen. A cursor is displayed at
the upper-left of the memo, representing the point where new
text will appear.
3. Enter the text you want to appear in the memo. Use the
carriage return stroke to move down to new lines in the
memo.
4. When you are finished, tap the Done button to return to the
Memo List screen.
Chapter 7: Expense
tap New
®
writing area to create a new memo. The first
cursor of
new Memo
page
91