Table of Contents
Advertisement
3. Under Record, select one of the following:
The Beam command for an individual record (/B)
In the Contacts view in PhoneBook only: Beam Business Card (/M)
Beam Category (/Y)
4. When the Beam Status dialog box appears, point the IR port directly at the IR port of the
receiving communicator.
Tip:
For best results, the path between the two devices must be clear of obstacles. If you have
difficulty beaming information, see the troubleshooting tips that begin on page 226.
5. Wait for the Beam Status dialog box to indicate that the transfer is complete before you
continue working on your communicator.
To beam an application:
1. Press Option
2.
Press Menu
3. Under App, select Beam (/B).
4. Tap the application you want to transfer.
Note:
Some applications are copy-protected and cannot be beamed. These are listed with
a lock icon next to them.
5. Tap Beam.
6. When the Beam Status dialog box appears, point the IR port directly at the IR port of the
receiving communicator.
7. Wait for the Beam Status dialog box to indicate that the transfer is complete before you
continue working on your communicator.
Chapter 5
and then press Menu
.
to access the Applications Launcher.
Page 81
Advertisement
Table of Contents
Troubleshooting
