Palm Treo 270 User Manual page 16

Locating top panel controls
Antenna
Stylus
Antenna Receives and sends wireless communication signals. The antenna does not
telescope out of your communicator.
Stylus Serves as the instrument used to tap options on your communicator screen.
To use the stylus, slide the stylus out of the slot, and hold it as you would a
pen or pencil.
Power Turns your communicator and wireless mode on and off, and controls the
button keyboard backlight. See page 19 for details.
IR port Uses infrared technology to transmit data to and receive data from other
Palm OS devices. See the section that begins on page 80 for details. You
can also use the IR port to update the information between your
communicator and computer using HotSync technology. See the section that
begins on page 200 for details.
LED Provides status information for your Treo based on the color of the light and
the blink state.
No light: Wireless mode off
Solid:
Blinking: Wireless mode on
Double-blink red: Low battery
Ringer switch Controls the ringer setting. See page 194 for details on changing the
settings.
Note:
Page 16
LED
Connected to travel charger
Green = Fully charged
Red = Charging
Green = In coverage area
Red = Out of coverage area
Silencing the ringer turns off all system sounds, including alarms.
When you silence the ringer, Date Book Plus alarms vibrate.
Power button
IR port
Ringer switch
Introduction to Your Treo™ 270 Communicator