Palm Treo 270 User Manual page 198

Available only
when Palm
Desktop software
is running
Manual
Tip: If you're not sure which option to use, keep the default setting: Always available.
4. Click the Local tab to display the settings for the connection between your computer and the
HotSync cable, and adjust the following options as needed.
Serial Port Identifies the port that your desktop software uses to communicate with the
optional serial HotSync cable. This selection should match the number of the
port to which you connected the optional cable.
Note:
Speed Determines the speed at which data is transferred between your
communicator and your desktop software. Try the As Fast As Possible rate
first, and adjust downward if you experience problems. This setting allows your
desktop software and your communicator to find and use the fastest speed.
5. Click the Modem tab to display the modem settings and adjust the options as needed. See
page 204 for more information.
6. If you are attached to a network, click the Network tab to display the network settings and
adjust the options as needed. See page 208 for more information.
7. Click OK.
Page 198
Starts HotSync Manager and monitors requests automatically when you
open Palm Desktop software.
Monitors requests only when you select HotSync Manager from the
Start menu.
Your communicator cannot share this port with an internal modem or
other device.
Advanced HotSync® Operations