Sfp Port - H3C S5130S-EI Series Hardware Information

Item
Max transmission distance
Transmission medium
Compatible standards

SFP port

Some S5130S-EI switch models provide SFP ports.
SFP transceiver modules and cables.
Table4-7 SFP port support for SFP transceiver modules and cables
Model
S5130S-28S-EI
S5130S-28ST-EI
S5130S-28S-EI-M
S5130S-28S-EI-DP
S5130S-52ST-EI
S5130S-52S-EI
S5130S-52S-EI-M
S5130S-16S-PWR-EI
S5130S-28S-PWR-EI
S5130S-28ST-PWR-EI
S5130S-52S-PWR-EI
S5130S-52S-PWR-EI-AC
S5130S-52ST-PWR-EI
S5130S-16S-UPWR-EI-Q
S5130S-28S-HPWR-EI-Q
S5130S-28S-UPWR-EI-Q
S5130S-10MS-UPWR-EI
S5130S-10P-EI
S5130S-20P-EI
S5130S-28P-EI
S5130S-28P-EI-M
S5130S-28MP-EI
S5130S-52MP-EI
Specification
•
10G mode:
100 m (328.08 ft) over Category-6 shielded twisted pair or

above twisted pair
60 m (196.85 ft) over Category-5e twisted pair or

Category-6 unshielded twisted pair
•
5G mode: 100 m (328.08 ft) over Category-5e or above
twisted pair
•
2.5G mode: 200 m (656.17 ft) over Category-5e or above
twisted pair
•
1G mode: 200 m (656.17 ft) over Category-5e or above
twisted pair
Category-6 (or above) twisted pair cable
•
IEEE 802.3ab
•
IEEE 802.3an
SFP port support for SFP
transceiver modules and cables
No SFP ports
GE SFP transceiver module and cables
in Table4-8
4-52
Table4-7 describes the SFP port support for the
Restrictions
N/A
To use transceiver modules with a
maximum transmission distance
greater than or equal to 80 km
(49.71 miles), make sure the
ambient temperature does not
exceed 40°C (104°F).