S5130S-52F-Ei - H3C S5130S-EI Series Hardware Information

(9) Power supply 2 status LED (PWR2)
(11) SFP+ port LED
(13) SFP+ port
Figure2-22 Rear panel
1
(1) Grounding screw
(3) Power supply 2 (PWR2)
The S5130S-28F-EI switch comes with power supply 1 empty and power supply slot 2 installed with
a filler panel. You can install one or two power supplies for the switch as needed. In Figure2-22, two
PSR150-A1 AC power supplies are installed.

S5130S-52F-EI

Figure2-23 Front panel
1 2
(1) SFP port
(3) 10/100/1000BASE-T autosensing Ethernet port
(4) 10/100/1000BASE-T autosensing Ethernet port LED
(5) Console port (CONSOLE)
(7) System status LED (SYS)
(9) Power supply 1 status LED (PWR1)
(11) SFP+ port LED
Figure2-24 Rear panel
1
(1) Grounding screw
(10) Power supply 1 status LED (PWR1)
(12) Management Ethernet port status LED (ACT/LINK)
2
(2) Power supply 1 (PWR1)
(2) SFP port LED
(6) Micro USB console port
(8) Power supply 2 status LED (PWR2)
(10) SFP+ port
2
(2) Power supply 1 (PWR1)
2-28
3
3 4 5 6
11 10 9 8 7
3