Advertisement
5.
Secure the control box to the right motion-control
cover using 2 carriage bolts (3/8 x 7/8 inch) and
2 locknuts (3/8 inch) as shown in
Figure 11
1. Locknut (3/8 inch)
2. Carriage bolt (3/8 x 7/8
inch)
6.
Install the previously removed self-threading
screw to the right motion-control cover
9).
7.
Secure the right side pod using the previously
removed 4 shoulder screws
8.
Install the adhesive back plastic mount on a
smooth, clean surface.
Thread the cable tie through the plastic mount
and secure the cables with the cable tie.
9.
Slowly move the mower deck through the
height-of-cut range to ensure that the cables do
not stretch or kink when you are operating the
machine.
Figure
11.
g349073
3. Control box
(Figure
(Figure
10).
8
Advertisement
