Burnham 8HE Series Installation, Operating And Service Instructions page 8

1
Pre-Installation
J. For Multiple boiler installations see also Series
8HE Multiple Boiler Application Instructions,
111924-01, available on Burnham Commercial
website.
K. Check for and remove any potential combustion
air contaminants from area around boiler. See
Table 1-4.
NOTICE: Flue side corrosion caused by
contaminants is not covered by warranty.
8
(continued)
8HE Installation, Operating & Service Instructions
Table 1-4: Corrosive Combustion Contaminants
and Sources
Contaminants to avoid:
Spray cans containing chloro/fluorocarbons (CFC's)
Permanent wave solutions
Chlorinated waxes/cleaners
Chlorine-based swimming pool chemicals
Calcium chloride used for thawing
Sodium chloride used for water softening
Refrigerant leaks
Paint or varnish removers
Hydrochloric acid/muriatic acid
Cements and glues
Antistatic fabric softeners used in clothes dryers
Chlorine-type bleaches, detergents, and cleaning
solvents found in household laundry rooms.
Adhesives used to fasten building products and
other similar products
Excessive dust and dirt
Areas likely to have contaminants:
Dry cleaning/laundry areas and establishments
Swimming pools
Metal fabrication plants
Beauty shops
Refrigeration repair shops
Photo processing plants
Auto body shops
Plastic manufacturing plants
Furniture refinishing areas and establishments
New building construction
Remodeling areas
Garages with workshops
111828-01 - 1/23