Air Flow Range Setting - Mitsubishi Heavy Industries SCM50ZS-W Service Manual

Inverter multi-split system residential air-conditioners split system, air to air heat pump type outdoor indoor unit wall mounted/ceiling concealed/4-way ceiling cassette/ceiling suspended/duct connected-low/middle static pressure type
Table of Contents

Advertisement

The OFF timer can be set at a specific time (in 10-minute units) within a 24-hour period.
(c) OFF timer operation
The OFF timer can be set at a specific time (in 10-minute units) within a 24-hour period.
(d) Weekly timer operation
Up to 4 programs with timer operation (ON timer / OFF timer) are available for each day of the week.
(d) Weekly timer operation
Up to 4 programs with timer operation (ON timer / OFF timer) are available for each day of the week.

(14) Air flow range setting

Take the air-conditioner location into account and adjust the left/right air flow range to maximize air-conditioning.
(14) Air flow range setting
(a) Setting
Take the air-conditioner location into account and adjust the left/right air flow range to maximize air-conditioning.
(i) If the air-conditioning unit is running, press the ON/OFF button to stop.
(a) Setting
(i) If the air-conditioning unit is running, press the ON/OFF button to stop.
(ii) Press the AIR FLOW U/D (UP/DOWN) button and the
AIR FLOW L/R (LEFT/RIGHT) button together for 5 seconds
(ii) Press the AIR FLOW U/D (UP/DOWN) button and the
or more.
AIR FLOW L/R (LEFT/RIGHT) button together for 5 seconds
or more.
(iii) Setting the air-conditioning installation location.
(iii) Setting the air-conditioning installation location.
(Center installation)
(Center installation)
Air flow range
(Left end installation)
Air flow range
(Left end installation)
(iv) Press the ON/OFF button.
(iv) Press the ON/OFF button.
(15) Display brightness adjustment
This function can be used when it is necessary to adjust the brightness of unit display.
Brightness level
LV2
LV1
LV0
Note(1) When the unit displays self diagnosis or service mode, brightness level is always LV2.
L/R
L/R
L/R
L/R
(Right end installation)
(Left end installation)
(Right end installation)
(Left end installation)
Air flow range
(Center installation)
Air flow range
(Center installation)
Run light
Timer light
100%
100%
50%
50%
0%
0%
23
-
-
'19 • SCM-SM-281
( i ), ( iv )
( ii ), (iii )
( ii )
MENU
Air flow range
(Right end installation)
Air flow range
(Right end installation)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents