JVC HR-S5600AM Instructions Manual page 21

Hide thumbs Also See for HR-S5600AM:
Table of Contents

Advertisement

S-VHS ET
This facility allows recording with S-VHS picture quality on VHS cassettes. You can play back those cassettes recorded in S-VHS ET on
a recorder equipped with S-VHS ET.
N O TES:
● To obtain the highest quality recording and playback pictures over a longer period on this model, S-VHS recording on S-VHS tape is
recommended.
● You can play back S-VHS ET recordings not only on this recorder but also on another VHS recorder equipped with S-VHS ET.
* It is recommended to specifically label S-VHS ET recordings so you can easily distinguish them from regular VHS recordings.
● S-VHS ET recordings can also be played back on an S-VHS recorder or a VHS recorder equipped with SQPB (S-VHS QUASI
PLAYBACK) function. However, there may be cases where S-VHS ET playback is not possible on a particular recorder.
● Frequent still, frame-by-frame and slow-motion playback may damage the tape and cause picture degradation.
● With some tapes, better picture quality may not be obtained even with S-VHS ET recording. It is recommended that you do test
record beforehand to make sure whether better results can be obtained.
● High Grade tapes are recommended for superior results.
● Make sure that "B.E.S.T." is set to "ON" (
● During S-VHS ET playback, noise may appear depending on tape quality.
● Noise may appear during search, still, frame-by-frame and slow-motion playback.
● If the playback picture becomes blurred or interrupted, use a cleaning cassette.
Downloaded from:
https://www.usersmanualguide.com/
Super VHS ET
Your recorder is equipped with Super VHS ET that makes it
possible to record with S-VHS picture quality on VHS cassettes.
1
2
N O TES:
● You cannot activate the S-VHS ET function...
...while recording is in progress.
...while timer-recording (incl. Instant Timer Recording
19) is in progress.
...while B.E.S.T. (
...when the recorder's power is off.
● S-VHS ET does not work with S-VHS tapes.
pg. 22).
SELECT S-VHS ET SET
MO DE
Press S-VH S ET . The
current setting appears on
the screen for about 5
seconds.
EN GAGE S-VHS ET MO DE
While the current setting is displayed on the screen,
press S-VH S ET again to set to "ON".
● The "S-VHS" indicator lights on the front display
panel.
pg. 22) is in progress.
21
EN
S-VHS ET : OFF
pg.

Advertisement

Table of Contents
loading

Table of Contents