Page 3
Text section with Technical Data, important Safety and Working Hints and description of Symbols 4100 470 755 - M18FBCU.indd 3 4100 470 755 - M18FBCU.indd 3 17.11.2022 12:41:13 17.11.2022 12:41:13...
Page 6
When handling the cutter always wear gloves and put the blade cover on the blade. The blade can be used on both sides. 4100 470 755 - M18FBCU.indd 6 4100 470 755 - M18FBCU.indd 6 17.11.2022 12:41:15 17.11.2022 12:41:15...
Page 14
Remove the battery pack before starting any work on the machine. click 4100 470 755 - M18FBCU.indd 14 4100 470 755 - M18FBCU.indd 14 17.11.2022 12:41:16 17.11.2022 12:41:16...
Cutting capacity max. 400 mm Cutting blade diameter 230 mm Weight according EPTA-Procedure 01/2014 (2.0 Ah ... 12.0 Ah) M18 FBCU Grass Trimmer 5,63 kg ... 6,75 kg M18 FBCU Brush Cutter 5,63 kg ... 6,75 kg Weight without battery...
not operate the machine when barefoot or wearing open sandals. If the blade binds, or when interrupting a cut for any reason, This reduces the chance of injury to the feet from contact with a switch the machine off and hold the machine motionless in moving cutter, line or blade.
Do not dispose of used battery packs in the household refuse or by In extremely high torque, binding, stalling and short circuit situations burning them. Milwaukee Distributors off er to retrieve old batteries to that cause high current draw, the tool will vibrate for about 5 seconds, protect our environment.
Make multiple passes in long growth to avoid blockages. please contact one of our Milwaukee service agents (see our list of guarantee/service addresses). Avoid ornamental trees, shrubs, and plantings. Avoid contact with siding, fence posts, etc.
Page 38
Use both hands while operating. Direct Current European Conformity Mark Keep bystanders at least 15 m away during use. British Conformity Mark Caution – hot surfaces! Ukraine Conformity Mark Ensure that nobody is at risk of materials being catapulted out or falling. EurAsian Conformity Mark Beware of blade thrust.
Page 39
GB-DECLARATION OF CONFORMITY We declare as the manufacturer under our sole responsibility that the product described under “Technical Data” fulfi lls all the listed below relevant regulations and that the following designated standards have been used. S.I. 2008/1597 (as amended) S.I.