Problem Solving Guide - Miele DGC 5080 XL Operating Instructions Manual

With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation can be put right
without contacting the Service Department.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
Problem
You cannot switch
the appliance on.
Demo mode has
been set and the
appliance does not
heat up.
Possible cause
The mains fuse has
tripped.
There may be a technical
fault.

Problem solving guide

Remedy
Reset the trip switch in the
mains fuse box (minimum fuse
rating - see data plate).
Disconnect the appliance from
the electricity supply for
approx. 1 minute. To do this:
– switch off at the isolator, or
– disconnect the mains fuse.
Reset the trip switch in the
mains fuse box, and switch
the appliance back on. If it still
will not switch on, contact a
qualified electrician or the
Miele Service Department.
Deactivate the demo mode
(see "Settings / Showroom
programme").
65