Keeping warm
Automatic rinse
Recommended temperatures
Water hardness
Display
Volume
This function can be activated or deactivated.
This function can be activated or deactivated.
If you frequently change a recommended temperature it may
be a good idea to change it permanently. You can change
the temperatures within the permitted range.
The steam combi oven is set at the factory to water hardness
level "Hard". You can set the steam combi oven for the water
hardness level in your area.
Your local water supplier will be able to advise you on the
water hardness for your area.
The water hardness is shown as levels equivalent to the
German scale.
Hardness level
Soft
Medium
Hard
The contrast and brightness can be adjusted.
The volume of the buzzer and also the keypad tone which
sounds each time a sensor is touched can be altered. The
keypad tone can also be switched off.
The frequency of the buzzer can be changed.
Hardness range
< 8.4 °dH
(below 1.5 mmol/l)
8.4 - 14 °dH
(1.5 - 2.5 mmol/l)
> 14 °dH
(above 2.5 mmol/l)
Settings
Setting
Soft 1
Medium 2
Hard 3
47