Removing The Spring; Disassembling The Front Gear Assembly; Inspecting The Dog Clutches; Inspecting The Inner Propeller Shaft - Yamaha SX150C Service Manual

LOWR
INNER PROPELLER SHAFT ASSEMBLY
(DUAL PROPELLER MODELS)
6435
6450

REMOVING THE SPRING

Remove:
• Spring 1
NOTE:
Pry the end of the spring out of the groove
in the dog clutch and then gradually
remove it.
DISASSEMBLING THE FRONT GEAR
ASSEMBLY
Remove:
• Bearing inner race
Bearing separator
YB-06219 / 90890-06534
CAUTION:
Do not reuse the bearing, always replace it
with a new one.

INSPECTING THE DOG CLUTCHES

Inspect:
• Dog clutches
Damage/wear → Replace.
INSPECTING THE INNER PROPELLER
SHAFT
Inspect:
• Inner propeller shaft
Damage/wear → Replace.

INSPECTING THE BEARING

Inspect:
• Tapered roller bearing
Pitting/rumbling → Replace.

INSPECTING THE FRONT GEAR

Inspect:
• Teeth
• Dogs
Damage/wear → Replace.
6-48
E