Fisher & Paykel DH8060P1 Getting Started

Getting started quickly
• Check the lint filter is clean and the water tank is empty before every load. Ensure both are replaced correctly
before using your dryer.
• The lint filter indicator will flash at the beginning of every cycle when the machine is switched on, as a reminder to
check the lint filter.
• Sort and load items into the dryer drum, ensuring no items are in the way of the door. Close the door (you will hear
it click shut).
1. Press 'POWER'
to activate your dryer
2. Your dryer will default to the 'Everyday' cycle. Select your desired drying cycle by turning the
SmartTouch™ Control Dial.
3. Select your preferred drying options, using the SmartTouch™ buttons on the right hand side of the panel (if you
wish to select options different from the default options for the cycle).
4. Touch the
button to start the cycle.
• If you make an invalid selection the dryer will beep to alert you.
• When the cycle finishes, your dryer will beep and then turn off automatically. If the 'Wrinkle Free' option has
been selected the machine will rotate the drum periodically blowing cool air into the drum to help minimise
wrinkling and creasing of your load.
• If you wish to change a cycle or select a different option once a drying cycle has started, touch the
button then select the new cycle or option. Touch
to restart the dryer with the new cycle and/or settings.
https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Heat_Pump/DH8060P1/User_Guide_DH8060P1/04_Getting_started_quickly
Updated: Wed, 01 Mar 2023 18:16:47 GMT
Powered by
1