Cleaning The Monitor; Cleaning The Mouse; Service Considerations; Tools And Software Requirements - Compaq Prosignia Desktop 340 Series Maintenance & Service Manual

Compaq desktop computer maintenance & service guide
Table of Contents

Advertisement

Visible debris underneath or between the keys may be removed by vacuuming or shaking.
Canned, pressurized air may be used to clean debris from under the keys. Caution should be
used as too much air pressure can dislodge lubricants applied under the wide keys.
If you remove a key, use a specially designed key puller to prevent damage to the keys. This
tool is available through many electronic supply outlets.
CAUTION: Never remove a wide leveled key (like the space bar) from the keyboard. If these keys are
Ä
improperly removed or installed, the keyboard may not function properly.
Cleaning under a key may be done with a swab moistened with isopropyl alcohol and
squeezed out. Be careful not to wipe away lubricants necessary for proper key functions. Use
tweezers to remove any fibers or dirt in confined areas. Allow the parts to air dry before
reassembly.

3.2.4 Cleaning the Monitor

Wipe the monitor screen with a clean cloth moistened with water or with a towlette designed
for cleaning monitors. Do not use sprays or aerosols directly on the screen; the liquid may
seep into the housing and damage a component. Never use solvents or flammable liquids on
the monitor.
To clean the monitor body follow the procedures in Section 3.2.2.

3.2.5 Cleaning the Mouse

Before cleaning the mouse, ensure that the power to the computer is turned off.
Clean the mouse ball by first removing the retaining plate and the ball from the housing. Pull
out any debris from the ball socket and wipe the ball with a clean, dry cloth before
reassembly.
To clean the mouse body, follow the procedures in Section 3.2.2.

3.3 Service Considerations

Listed below are some of the considerations that you should keep in mind during the disassembly
and assembly of the computer.

3.3.1 Tools and Software Requirements

To service the computer, you need the following:
Torx T-15 screwdriver (Compaq screwdriver, part number 161946-001)
Flat-bladed screwdriver
Diagnostics software
Compaq Prosignia Desktop 340 Series Computer
Removal and Replacement Preliminaries and Routine Care
3–5

Advertisement

Table of Contents
loading

Table of Contents